Cynhwysydd Hidlo Ac Amlder Uchel o ansawdd da - Cynhwysydd Hidlo AC (AKMJ-MC) - CRE
Cynhwysydd Hidlo Ac Amlder Uchel o ansawdd da - Cynhwysydd Hidlo AC (AKMJ-MC) - Manylion CRE:
Data technegol
Amrediad tymheredd gweithredu | Tymheredd Max.Operating: +85 ℃ tymheredd categori uchaf: +70 ℃ tymheredd categori is:-40 ℃ | ||
ystod capacitance | Un cyfnod | 20UF ~ 500 μF | |
tri cham | 3×40UF~3×200μF | ||
Foltedd graddedig | 330V.AC/50Hz ~ 1140V.AC/50Hz | ||
Cap.tol | ±5%(J); | ||
Gwrthsefyll foltedd | Vt-t | 2.15Un /10S | |
Vt-c | 1000+2×Un V.AC 60S(min 3000V.AC) | ||
Dros Foltedd | 1.1Un(30% o ar-lwyth-yn ystod.) | ||
1.15 Un (30 munud / dydd) | |||
1.2 Un (5 munud / dydd) | |||
1.3Un(1mun/dydd) | |||
1.5Un (100ms bob tro, 1000 o weithiau yn ystod oes) | |||
Ffactor afradu | tgδ≤0.002 f=100Hz | ||
tgδ0≤0.0002 | |||
Gwrthiant inswleiddio | RS * C ≥ 10000S (ar 20 ℃ 100V.DC) | ||
arafu fflamau | UL94V-0 | ||
Agwedd uchaf | 2000m | ||
Pan fo'r uchder yn uwch na 2000m i lai na 5000m, mae angen ystyried y defnydd o lai.(ar gyfer pob cynnydd o 1000m, bydd y foltedd a'r cerrynt yn cael eu lleihau 10%)
| |||
Disgwyliad oes | 100000h(Un; Θ man poeth ≤55 ° C) | ||
Safon gyfeirio | IEC61071;IEC 60831; |
Nodwedd
1. Pecyn tai crwn alwminiwm, Wedi'i selio â resin;
2. gwifrau cnau/sgriw copr, lleoliad gorchudd plastig wedi'i inswleiddio;
3. Gallu mawr, dimensiwn wedi'i addasu;
4. Gwrthwynebiad i foltedd uchel, gyda hunan-iachau;
5. cerrynt crychdonni uchel, gallu gwrthsefyll dv / dt uchel.
Cais
1. Defnyddir yn helaeth mewn offer electronig pŵer a ddefnyddir ar gyfer hidlo AC.
2. Yn y UPS high-power, newid cyflenwad pŵer, gwrthdröydd ac offer eraill ar gyfer yr hidlydd AC, harmonics a gwella rheolaeth ffactor pŵer.
Cylched nodweddiadol
Disgwyliad oes
Darlun amlinellol o un cyfnod
ΦD(mm) | P(mm) | H1(mm) | S | F | M |
76 | 32 | 20 | M12×16 | M6×10 | M8×20 |
86 | 32 | 20 | M12×16 | M6×10 | M8×20 |
96 | 45 | 20 | M12×16 | M6×10 | M8×20 |
116 | 50 | 22 | M12×16 | M6×10 | M8×20 |
136 | 50 | 30 | M16×25 | M6×10 | M8×20 |
Amlinelliad o luniad tri cham
ΦD(mm) | H1(mm) | S | F | M | D1 | P |
116 | 40 | M12×16 | M6×10 | M8×20 | 50 | 43.5 |
136 | 30 | M16×25 | M6×10 | M8×20 | 60 | 52 |
foltedd | Un=330V.AC Ni=1200V | ||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms (A) 50 ℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | pwysau (Kg) |
80 | 76 | 80 | 40 | 80 | 6.4 | 19.2 | 30 | 4 | 4.2 | 32 | 0.5 |
120 | 86 | 80 | 40 | 70 | 8.4 | 25.2 | 40 | 2.8 | 3.3 | 32 | 0.7 |
150 | 96 | 80 | 45 | 70 | 10.5 | 31.5 | 50 | 3.5 | 1.7 | 45 | 0.75 |
170 | 76 | 130 | 50 | 60 | 10.2 | 30.6 | 60 | 3.2 | 1.3 | 32 | 0.75 |
230 | 86 | 130 | 50 | 60 | 13.8 | 41.4 | 70 | 2.4 | 1.3 | 32 | 1.1 |
300 | 96 | 130 | 50 | 50 | 15.0 | 45.0 | 75 | 2.8 | 1.0 | 45 | 1.2 |
420 | 116 | 130 | 60 | 50 | 21.0 | 63.0 | 80 | 1.9 | 1.2 | 50 | 1.6 |
foltedd | Un=450V.AC Ni=1520V | ||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms (A) 50 ℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | pwysau (Kg) |
50 | 76 | 80 | 40 | 90 | 4.5 | 13.5 | 30 | 4 | 4.2 | 32 | 0.5 |
65 | 86 | 80 | 50 | 80 | 5.2 | 15.6 | 40 | 2.8 | 3.3 | 32 | 0.7 |
80 | 96 | 80 | 45 | 80 | 6.4 | 19.2 | 50 | 3.5 | 1.7 | 45 | 0.75 |
100 | 76 | 130 | 50 | 70 | 7.0 | 21.0 | 60 | 3.2 | 1.3 | 32 | 0.75 |
130 | 86 | 130 | 45 | 60 | 7.8 | 23.4 | 70 | 2.4 | 1.3 | 32 | 1.1 |
160 | 96 | 130 | 50 | 50 | 8.0 | 24.0 | 75 | 2.8 | 1.0 | 45 | 1.2 |
250 | 116 | 130 | 60 | 50 | 12.5 | 37.5 | 80 | 1.9 | 1.2 | 50 | 1.6 |
foltedd | Un=690V.AC Ni=2100V | ||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms (A) 50 ℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | pwysau (Kg) |
40 | 76 | 130 | 50 | 100 | 4.0 | 12.0 | 30 | 2.8 | 6.0 | 32 | 0.75 |
50 | 76 | 150 | 45 | 90 | 4.5 | 13.5 | 35 | 2.4 | 5.1 | 32 | 0.85 |
60 | 86 | 130 | 45 | 80 | 4.8 | 14.4 | 40 | 2.2 | 4.3 | 32 | 1.1 |
65 | 86 | 150 | 50 | 80 | 5.2 | 15.6 | 45 | 1.8 | 4.1 | 32 | 1.2 |
75 | 96 | 130 | 50 | 80 | 6.0 | 18.0 | 50 | 1.5 | 4.0 | 45 | 1.2 |
80 | 96 | 150 | 55 | 75 | 6.0 | 18.0 | 60 | 1.2 | 3.5 | 45 | 1.3 |
110 | 116 | 130 | 60 | 70 | 7.7 | 23.1 | 65 | 0.8 | 4.4 | 50 | 1.6 |
120 | 116 | 150 | 65 | 50 | 6.0 | 18.0 | 75 | 0.6 | 4.4 | 50 | 1.8 |
foltedd | Un=850V.AC Ni=2850V | ||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms (A) 50 ℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | pwysau (Kg) |
25 | 76 | 130 | 50 | 110 | 2.8 | 8.3 | 35 | 1.5 | 8.2 | 32 | 0.75 |
30 | 76 | 150 | 60 | 100 | 3.0 | 9.0 | 40 | 1.2 | 7.8 | 32 | 0.85 |
32 | 86 | 130 | 45 | 100 | 3.2 | 9.6 | 50 | 1.15 | 5.2 | 32 | 1.1 |
45 | 86 | 150 | 50 | 90 | 4.1 | 12.2 | 50 | 1.05 | 5.7 | 32 | 1.2 |
40 | 96 | 130 | 50 | 90 | 3.6 | 10.8 | 50 | 1 | 6.0 | 45 | 1.2 |
60 | 96 | 150 | 60 | 85 | 5.1 | 15.3 | 60 | 0.9 | 4.6 | 45 | 1.3 |
60 | 116 | 130 | 60 | 80 | 4.8 | 14.4 | 65 | 0.85 | 4.2 | 50 | 1.6 |
90 | 116 | 150 | 65 | 75 | 6.8 | 20.3 | 75 | 0.8 | 3.3 | 50 | 1.8 |
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms(A) | ESR(mΩ) | Rth(K/W) | P(mm) | pwysau (Kg) | |
foltedd | Un=400V.AC Ni=1200V | |||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms (A) 50 ℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | pwysau (Kg) | |
3 × | 110 | 116 | 130 | 100 | 60 | 6.6 | 19.8 | 3×50 | 3×0.78 | 4.5 | 43.5 | 1.6 |
3 × | 145 | 116 | 180 | 110 | 50 | 7.3 | 21.8 | 3×60 | 3×0.72 | 3.8 | 43.5 | 2.4 |
3 × | 175 | 116 | 210 | 120 | 50 | 8.8 | 26.3 | 3×75 | 3×0.67 | 3.5 | 43.5 | 2.7 |
3 × | 200 | 136 | 230 | 125 | 40 | 8.0 | 24.0 | 3×85 | 3×0.6 | 2.1 | 52 | 4.2 |
foltedd | Un=500V.AC Ni=1520V | |||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms (A) 50 ℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | pwysau (Kg) | |
3 × | 100 | 116 | 180 | 100 | 80 | 8.0 | 24.0 | 3×45 | 3×0.78 | 4.5 | 43.5 | 2.6 |
3 × | 120 | 116 | 230 | 120 | 70 | 8.4 | 25.2 | 3×50 | 3×0.72 | 3.8 | 43.5 | 3 |
3 × | 125 | 136 | 180 | 110 | 40 | 5.0 | 15.0 | 3×70 | 3×0.67 | 3.5 | 52 | 3.2 |
3 × | 135 | 136 | 230 | 130 | 50 | 6.8 | 20.3 | 3×80 | 3×0.6 | 2.1 | 52 | 4.2 |
foltedd | Un=690V.AC Ni=2100V | |||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms (A) 50 ℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | pwysau (Kg) | |
3 × | 49 | 116 | 230 | 120 | 70 | 3.4 | 10.3 | 3×56 | 3×0.55 | 2.1 | 43.5 | 3 |
3 × | 55.7 | 136 | 230 | 130 | 90 | 5.0 | 15.0 | 3×56 | 3×0.4 | 2.1 | 52 | 4.2 |
foltedd | Un=850V.AC Ni=2580V | |||||||||||
Cn (μF) | φD | H | ESL(nH) | dv/dt(V/μS) | IP(KA) | ydy(KA) | Irms (A) 50 ℃ | ESR (mΩ) @1KHz | Rth(K/W) | P(mm) | pwysau (Kg) | |
3 × | 41.5 | 116 | 230 | 120 | 80 | 3.0 | 9.0 | 3×56 | 3×0.55 | 2.1 | 43.5 | 3 |
3 × | 55.7 | 136 | 230 | 130 | 50 | 0.4 | 1.2 | 3×104 | 3×0.45 | 1.8 | 52 | 4.2 |
Lluniau manylion cynnyrch:
Canllaw Cynnyrch Cysylltiedig:
Gan gadw "Cwsmer i ddechrau, Ansawdd uchel yn gyntaf" mewn golwg, rydym yn gwneud y gwaith yn agos gyda'n cwsmeriaid ac yn cyflenwi darparwyr effeithlon a medrus iddynt ar gyfer Cynhwysydd Hidlo Ac Amlder Uchel o ansawdd da - Cynhwysydd Hidlo AC (AKMJ-MC) - CRE, Y cynnyrch Bydd cyflenwi i bob rhan o'r byd, megis: Cannes, Liberia, venezuela, Wynebu cystadleuaeth farchnad fyd-eang ffyrnig, rydym wedi lansio'r strategaeth adeiladu brand a diweddaru ysbryd "gwasanaeth dynol-ganolog a ffyddlon", gyda'r nod o ennill byd-eang cydnabod a datblygu cynaliadwy.
Mae gan y fenter gyfalaf cryf a phŵer cystadleuol, mae'r cynnyrch yn ddigonol, yn ddibynadwy, felly nid oes gennym unrhyw bryderon ynglŷn â chydweithio â nhw. Gan Dawn o Paraguay - 2017.09.29 11:19